PiiGAB 810/20, Руководство пользователя

Страница: 14 / 15

14
S
ta
rtKi
t1
_
2
.E
.1
.1
3
PiiGAB Explorer / M-Bus OPC-server – M-Bus communication
When the M-Bus communication is confirmed with PiiGAB M-Bus Setup Wizard, you may use PiiGAB
Explorer to see what is possible to read RELAY’s PadPulse M2. You can also use PiiGAB Explorer’s built in
OPC-client to read the values from RELAY’s PadPulse M2.
Try the StartKit1_2 example project in PiiGAB Explorer
1. Start PiiGAB Explorer
2. Go to File menu and press the Open button
3. Browse to the local folder and open PiiGABStartKit1_2.xml
4. Go to File menu and press Set As Active Project
This will set the PiiGABStartKit1_2.xml as the active project for the OPC-server. You may look around in
this project and see a default configuration of RELAY’s PadPulse M2.
For instance look at the configuration for each meter in the project:

PadPulse M2 P1 RELAY’s PadPulse M2 pulse meter with primary address 0

PadPulse M2 P2 RELAY’s PadPulse M2 pulse meter with primary address 1