9
List of Hidden Features only accessible via MIDI:
• Bit Crusher
• Tap
• ½ Tap
• Halo
• Square Wave LFO
• Saw Wave LFO
• Hold LFO
• Super Square Wave LFO
• Super Saw Wave LFO
• Super Hold LFO
Setting the Echolution 3 MIDI Channel:
To set the MIDI channel on the Echolution 3, Press and Hold the Preset and Special FX buttons during
boot up. The LED in the lop left corner will blink, indicating that the Echolution 3 is set to receive MIDI
on Channel 1. Press the Tap footswitch to advance the channel number. The total number of LEDs lit
will indicate the MIDI channel that is selected. Press the Engage footswitch to select the appropriate
MIDI channel. The unit will then finish booting up.
MIDI Preset Change:
To load a particular preset, simply send a program change command with the desired preset number.
Echolution 3 will load that number plus one as the preset.
MIDI Quantization:
When MIDI Synced, tapping a new delay length will quantize the new length to an integer number of
MIDI quarter notes (i.e. you can change the delay time while remaining MIDI Synced). To get back to
the original delay time, double tap the Tempo switch.
MIDI and Hidden Features
