8
The Echolution 3 is compatible with a single, dual, or triple footswitch momentary remote using a
TRS (balanced 1/4”) cable. The Remote switch can be used to toggle Reverse (tip to sleeve) and Jump
(ring to sleeve) as well as a Freeze (tip and ring to sleeve) functions.
The Remote switch can also be made to control Preset Select by pushing and holding the preset
selector switch during boot up. See the complete list of boot options below.
Engage Switch = Trails - Disconnects delay line input but leaves delay line output connected in bypass.
Tap Switch = Global Rap - Tempo does not change when selecting a new preset.
Reverse Switch = Wet / Dry - Sums both inputs and routes them to one output while routing the delay
line to the other output. *Note - This mode overrides Dry Kill and Phase Invert.
Modulation Switch = Phase Invert - Inverts the phase of the delay line in one channel only.
Subdivisions Switch = Dry Kill - Eliminates clean pass through audio. Delay line only.
Preset = Remote Switch control mode - Toggles remote switch functionality between Preset Selection
and Special FX (Reverse, Jump, Freeze).
Special FX Mode:
Tip = Reverse
Ring = Jump
Both = Freeze. This creates a static loop from whatever material is in the delay line.
Preset Mode:
Tip = Preset 1 / 2
Ring = Preset 3 / 4
MIDI:
The Echolution 3 is compatible with ¼” MIDI input. Echolution 3 will automatically follow MIDI clock
signals as a means of setting the delay time. Echolution 3 will also obey MIDI preset change commands.
MIDI CC control of every onboard function is available, along with several “hidden” features, not
available on the face of the unit.
Remote Switch
Boot Options
