5
EN
How to assemble
Caution
• Prior to using for the first time, disassemble the pump and wash and sterilize the parts. • Clean
your hands before assembling. • This pump can be disassembled into small parts. Do not let
children put any parts in their mouth and do not lose any parts during assembly. • Do not handle
silicone rubber parts roughly. Doing so will cause tears or scratches. • Always assemble the
pump in the correct order.
Insert the stem into the
diaphragm.
Place the diaphragm on
top of the main body.
Firmly seat the bottom
of the diaphragm in the
groove of the main body.
If not fitted securely, air will
leak through and the pump
will not be able to achieve
suction.
Hold the base of the
silicone valve and attach it
to the main body.
Screw the main body onto
the bottle.
Align the shaft of the main
body with the groove in the
handle.
Gently press the handle
down to fit it onto the shaft.
Push until you hear it click.
Press the “PUSH” part at
the tip of the handle to set
the handle hole into the first
(top) notch of the stem.
Attach the Comfort
ProperFit™ flange cover to
the flange.
Attach the flange to the
main body.
Press the bottle into the
bottle stand.
Groove
Shaft
ManualBreastPump_EN_ES_RU.indd 5
2017/03/10 9:36
