Geschäftsführer: Dr. Bernt Götz • Telefon 03641/66880 • Fax 03641/668866 • www.piezojena.com
50
8.4 technical data
NV40/3 [CLE]
NV120/1 [CLE]
number of channels
3
1
output power
3x 5W
15W
output voltage
-20V to +130V
output current (continuous)
3x 40mA
120mA
noise of output voltage
<0,3mV
RMS
@ 500 Hz
modulation input (MOD)
0V to +10V, D-SUB25pin
input impedance
10 kΩ
manually control
digital encoder
display
TFT full colour graphic, 320x240 Pixel
output connector
3x D-SUB15pin
D-SUB15pin
monitor output (MON)
NV40/3
CLE
, NV120/1
CLE
selectable
D-
SUB25pin, output impedance <100Ω
-13 to +13V measuring system voltage (open loop)
0 to +10V measuring system voltage (closed loop)
monitor output (MON)
NV40/3, NV120/1
D-
SUB25pin, output impedance <100Ω
0 to +10V (equates to actuator voltage -20 to +130V)
closed loop control
(
)
PID analogue, switched on/off by pushing the encoder
knob,
for CAP und SG sensors
dimensions w x h x l
210mm x 88mm x 240mm
mass
2,1kg
interface
RS232 D-SUB9pin, USB 1.1
converter resolution
16 bit
features
soft start function, ASI function, over voltage protection,
over temperature protection, short circuit proof,
dimmable display
main power supply
24VDC / 2,5A
(wide range power supply 100-240VAC is included in
the shipment)
order info
NV40/3
– E-101-20
NV40/3CLE
– E-101-23
NV120/1
– E-101-90
NV120/1CLE
– E-101-93
chart 5: technical data NV40/3 [CLE], NV120/1 [CLE]
