PIETRO FIORENTINI SSM-ICON, Руководство пользователя

Страница: 67 / 74

67
SSM-ICON
Use, maintenance and warning manual
Static SmaRt mEtER | UNiNStaLLatiON aND DiSPOSaL | REV. B
EN
10 - UNINSTALLATION AND DISPOSAL
10.1 - GENERAL SAFETY WARNINGS
HAZARD!
Make sure that there are no potentially explosive ignition sources in the work area set up to uninstall and/
or dispose of the equipment.
WARNING!
Before proceeding with uninstallation and disposal, make the equipment safe by disconnecting it from any
power supply.
10.2 - QUALIFICATION OF THE OPERATORS IN CHARGE
Uninstallation
Operator qualification • installer.
PPE required
WARNING!
The PPE listed in this table is related to the risk associated with the equipment.
For the PPE required to protect against risks associated with the workplace,
installation or operating conditions, please refer to:
• the regulations in force in the country of installation;
• any information provided by the Safety Manager at the installation facility.
Equipment
required
Keys to fix inlet and outlet connections fittings/equipment.
Tab. 10.55.
10.3 - UNINSTALLATION
To properly uninstall the equipment, proceed as specified in Tab. 10.56.:
Step Action
1 close the valves upstream and downstream of the equipment.
2
Disconnect the upstream and downstream pipes from the equipment by unscrewing the fittings with adequate
hand tools.
3
Remove the equipment.
NOTICE!
Seal the valves upstream and downstream of the equipment if:
• closing the system;
• the equipment is not replaced immediately.
Tab. 10.56.