PIETRO FIORENTINI ASX 176, Перевод оригинальной инструкции

Страница: 63 / 254

63
ASX 176
Use, maintenance and warning instructions
HIGH PRESSURE REGULATOR | TRANSPORT AND HANDLING | REV. 00
EN
5.3.2 - CRANE HANDLING METHOD
WARNING!
It is mandatory to use chains, ropes and eyebolts CE marked or marked with conformity marks in accord-
ance with the regulations in force in the place of installation. Do not use chains connected to each other
by bolts.
Always check that:
• the safety catch of the hook returns to the initial position;
• the ropes are in excellent condition and have adequate sections.
It is forbidden to:
• drag the load on the ground;
• operate near power lines;
• stand within the range of action of the crane.
NOTICE!
Packaging must be always handled in a vertical position.
The equipment must be handled using the lifting points provided on the equipment itself. For proper transport, follow the
procedure below:
Step Action Image
1
Attach the lifting rope or chain to the appropriate supports.
WARNING!
The lifting point is sized for lifting only the equipment, and
not other parts of the system connected to it.
.
2
Slightly lift the load making sure the ropes or chains are secure.
NOTICE!
Check whether the load is properly balanced.
3 Handle the load avoiding sudden movements.
4 Place the load in the chosen installation area.
Tab. 5.34.