PIEPS 24107, Руководство пользователя

Страница: 13 / 68

08/13 | 13
CHECK-MODE B – MULTIpLE BURIAL
If Check A3 (active transmitter nearby) is confirmed, the PIEPS iPROBE
ONE is switching into check-mode B. The PIEPS iPROBE ONE deacti-
vates within 8 seconds the strongest transmitting signal EN300718 of
all beacons with iPROBE ONE Support*.
* Beacons with iPROBE ONE Support: PIEPS DSP PRO, PIEPS DSP
SPORT, PIEPS VECTOR, PIEPS DSP (with Software Version 5.0 or grea-
ter), PIEPS DSP Tour, PIEPS FREERIDE
aCousTIC sIgnal:
5 short Beep-signals
(piep-piep-piep-piep-piep – – – piep-piep-piep-piep-piep...)
The next strongest signal is automatically shown on the display of the
receiving beacon. As long as the PIEPS iPROBE ONE is nearby the
transmitting beacon, the transmitting beacon is deactivated. If the
probe is used to probe for a second transmitter, the first transmitting
beacon is activated and starts to transmit again.
As soon as the PIEPS iPROBE ONE receives the new transmitting si-
gnal, the iPROBE ONE switches immediately and automatically back
to check-mode A.
If the transmitting beacon has no iPROBE ONE support, the iPROBE
ONE remains in CHECK A3.
CHECK-MODE A – TARGET INDICATION
The PIEPS iPROBE ONE detects an active transmitter according the
standard EN300718. The target indication is working with every
standard beacon.
Check a1 – no transmitter is nearby: permanent acoustic signal
(tschip__tschip__tschip_...)
Check a2 – active transmitter is nearby (approx. 0,5 to 2 m):
permanent acoustic signal with the transmitter bit timing (piep_piep_
piep_...)
Check a3 – active transmitter is nearby (< approx. 50 cm):
permanent optical and acoustic signal (piiiiiiiiiiiep)
DE EN ES FR IT CZ SK RU