SLEEVE BEARING
Always use a Sleeve Bearing when working with the
Super Midi Miller or Super Midi C. It prolongs
the lifetime of the flexible shaft and prevents the
outer casing from melting in the tool end. Sleeve
bearings can be reused when outer casing has been
shortened.
CREATING LEADERS
You can extend the life of the flexible shaft and increase
productivity on site by making individual leaders for the
most commonly used tools. This way you can easily and
quickly switch between tools
.
Leaders should always be
used if the situation permits it.
ADDING A VISUAL MARKER FOR SAFETY
If not using a “leader” attach a visual marker
(tape) on the outer casing of the flexible shaft.
Place it around 500mm (20”) from the end of
the shaft. The marker will indicate the tools
location and help prevent possible injury from
the rotating parts by alerting you when the
tool is about to exit the pipe.
Here are some useful tips on how to get the most out of your Picote system.
Always use the recommended tools for maintenance to avoid personal injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
PRACTICAL TIPS & SAFETY ADVICE
10
20
Picote Solutions Oy Ltd www.picoteinstitute.com
