SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
MAINTENANCE
16
14
CHANGING OIL IN THE ANGLE GEAR
The oil should be changed after every 3000 hours of use or 12 months.
1.
Dismount the gear guard and the hand guard.
2.
Take the shaft socket off of the shaft.
3.
Loosen the bolts holding the angle gear.
4.
Pull the angle gear away from the motor following the axle of the motor.
5.
When the angle gear has been dismounted, loosen the oil screw (there is only one screw on the gearbox).
6.
Pour the old oil out and add the new oil.
7.
Reassemble the bevel gear by repeating the previous steps in reverse order.
Appropriate oils to use:
Shell omala 100 or Agip blasia 100 or Tamoil ep 100
Amount of oil:
42 g / 1.5 oz / 47ml
If there is problem that you cannot resolve with this manual, please consult your Picote
Reseller or Picote Solutions.
INSPECTING FLEXIBLE SHAFT FOR DAMAGE
Carefully inspect the flexible shaft and its casing on a regular
basis to ensure that there are no signs of wear and tear.
Change the flexible shaft and casing as and when required.
Damaged shaft needs to be trimmed back before attaching
tools (see examples to right).
www.picoteinstitute.com
Picote Solutions Oy Ltd
17
