manualshive.com logo in svg

pico Technology PicoScope 3425, Руководство пользователя

Поделиться
Скачать
pico Technology PicoScope 3425 Скачать руководство пользователя страница 18

PicoScope 3425 PC Oscilloscope

14

Copyright © 2007 Pico Technology Limited. All rights reserved.

ps3425.en

3.2.4.3

Streaming modes

The streaming modes are alternatives to 

block mode

 that can capture data

without gaps between blocks.  

In a streaming mode, the computer prompts the PicoScope 3425 PC Oscilloscope to
start collecting data.  The data is then transferred back to the PC without being stored
in oscilloscope memory.  Data can be sampled with a period between 1 µs and 60 s,
and the maximum number of samples is limited only by the amount of free space on
the PC's hard disk.

There are two streaming modes:

Compatible streaming mode

 

Fast streaming mode

 

3.2.4.4

Compatible streaming mode

Compatible streaming mode is a basic 

streaming mode

 that works with all

scope units, at speeds from one sample per minute to a thousand samples per
second.

The oscilloscope's driver transfers data to a computer program using either normal or
windowed mode. In normal mode, any data collected since the last data transfer
operation is returned in its entirety. Normal mode is useful if the computer program
requires fresh data on every transfer.  In windowed mode, a fixed number of samples
is returned, where the oldest samples may have already been returned before.
Windowed mode is useful when the program requires a constant time period of data.  

Once the oscilloscope is collecting data in streaming mode, any setup changes (for
example, changing a channel range or 

AC/DC

 setting) will cause a restart of the

data stream. The driver can buffer up to 32 K samples of data per channel, but the
user must ensure that the 

ps3000_get_values()

 function is called frequently

enough to avoid buffer overrun. 

See 

Using compatible streaming mode

 for programming details.

Applicability

Does not support 

triggering

.

The 

ps3000_get_times_and_values()

 function will always

return FALSE (0) in streaming mode.

3.2.4.5

Using compatible streaming mode

This is the general procedure for reading and displaying data in 

compatible streaming

mode

:

1.

Open the oscilloscope using 

ps3000_open_unit()

2.

Select channel ranges and AC/DC switches using 

ps3000_set_channel()

3.

Start the oscilloscope running using 

ps3000_run_streaming()

4.

Transfer the block of data from the oscilloscope using 

ps3000_get_values()

5.

Display the data

6.

Repeat steps 4 and 5 as necessary

7.

Stop the oscilloscope using 

ps3000_stop()

13

14

15

14

56

39

14

12

40

14

18

22

36

39

38

Содержание PicoScope 3425





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды