manualshive.com logo in svg

pico Technology PicoScope 3425, Руководство пользователя

Поделиться
Скачать
pico Technology PicoScope 3425 Скачать руководство пользователя страница 15

Product information

11

Copyright © 2007 Pico Technology Limited. All rights reserved.

ps3425.en

2.7

Overflow indicators

PicoScope 6, the PC Oscilloscope software supplied with the PicoScope 3425, displays
a yellow common-mode overflow indicator for each channel when either the
positive or the negative input voltage with respect to ground is outside the range
stated in the 

Specifications.

  Exceeding the common-mode range of the scope

causes inaccurate measurements and can lead to severe signal distortion.

The red differential overflow indicator is used to warn when the differential
voltage (the difference between the positive and negative inputs) on each channel
exceeds the selected voltage range.  This condition causes clipping of the displayed
signal.

2.8

AC/DC coupling

Each channel can be set to use either AC or DC coupling. When AC coupling is used,
any DC component of the signal below about 1 hertz is filtered out.

To change the coupling mode, select AC or DC from the control on the oscilloscope
toolbar of the PicoScope software. The setting should be chosen to suit the
characteristics of the input signal.

2.9

Resolution enhance

The hardware resolution of the oscilloscope is 12 bits, but you can obtain an effective
resolution of up to 16 bits using the Resolution Enhance feature built in to the
PicoScope software.  See the PicoScope 6 User's Guide for details.

9

Содержание PicoScope 3425





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды