PicoLog CM3 Current Data Logger User's Guide
1
Copyright © 2011 Pico Technology Ltd. All rights reserved.
plcm3.en
1
Introduction
1.1
Overview
The PicoLog CM3 is a three-channel, high-resolution current
data logger for monitoring current on up to three channels.
With high accuracy and low noise, the PicoLog CM3 is ideal
for recording data from three-phase supplies. The USB and
Ethernet interfaces allow the logger to be used as a USB-only
device, as a USB-powered device with Ethernet interface, or
as a Power-over-Ethernet (PoE) device. Using the Ethernet
interface, the PicoLog CM3 can be located anywhere on a
LAN or on the internet.
Programmer's Guide
All the software that you need for everyday use of the PicoLog CM3 is supplied with
the unit. For more advanced applications, you can write your own software.
Information on programming is published in a separate guide:
PicoLog CM3 Data Logger Programmer's Guide (plcm3pg.en.pdf)
Driver Installation
The driver was installed automatically when you installed PicoLog Recorder software.
Alternatively, you can download the driver from our website at
