Product information
10
Copyright © 2011 Pico Technology Ltd. All rights reserved.
plcm3.en
5.
USB connection:
Select the device with the correct type and serial number, and
click
OK.
Ethernet connection:
Any
PicoLog CM3
devices visible to your computer on
your local network will appear in the list. Select the device with the correct type,
serial number and IP address, and click
OK
. If your device does not appear in the
list, type its IP address and port number in the boxes below the list.
When you click
OK
, the
PicoLog CM3 channels
window will appear:
6. In the
PicoLog CM3 channels
window, double-click on
Ch1 unused
. The
Edit
PicoLog CM3 Channel
dialog box appears:
7. Type in a name for the channel, if required.
8. Select the data type required i.e 1 mV/A, 10 mV/A , 100 mV/A, or Voltage.
