background image

DSP806

2

Rev. 01/03

Ph:800-421-6511

www.picomacom.com

The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of un-insulated "dangerous voltage" within
the product's enclosure that may be of sufficient magni-
tude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.

Product Inspection

Inspect the equipment for shipping damage. Should any damage be discovered, immediately file a claim with the carrier.

Important Safety Instructions

To insure proper installation and operation, take a moment to read this guide before proceeding with the installation. If you have any questions
or comments about the DSP806 digital signal processor, please contact your dealer or have him contact the PICO MACOM Service Center at
these phone numbers: 800-421-6511, 818-493-4300.

1.  Read Instructions - 

All the safety and operating instructions

should be read before the appliance is operated.

2.  Retain Instructions - 

The safety and operating instructions

should be retained for future reference.

3.  Heed Warnings

- All warnings on the appliance should be

adhered to.

4.  Follow Instructions - 

All operating and user instructions should

be followed.

5.  Cleaning - 

Unplug this appliance from the wall outlet before clean-

ing. Use a damp cloth for cleaning. Do not use liquid cleaners or
aerosol cleansers.

6.  Do Not Use Attachments - 

not recommended by the manufac-

turer or they may cause hazards.

7. Water and Moisture - 

Do not use this product near water - for

example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet
basement, or near a swimming pool - and the like.

8.  Accessories - 

Do not place this product on an unstable cart,

stand, tripod, bracket, or table. The product may fall, causing serious
injury to a child or adult, and serious damage to the appliance.

9.  Ventilation - 

This video product should never be placed near or

over a radiator or heat register. This video product should not be
placed in a built-in installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s instructions have
been adhered to. Any slots or opening in the cabinet are provided for
ventilation. To ensure reliable operation of this video product and to
protect it from overheating, these openings must not be blocked or
covered. The openings should never be blocked. Avoid placing the
product on a bed, sofa, rug, or other similar surface.

10.  Grounding or Polarization - 

This video product is equipped with

either a three-prong plug for 110 Vac use or a two-prong flat blade
220 Vac type plug. Each type is to be inserted into only the type of
receptacle for which they are specifically designed. Do not cut off the
round grounding pin of a three-prong plug in order to be able to fit into
a two prong receptacle as this could cause injury and will void the

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO 

RAIN OR MOISTURE.  DO NOT OPEN THE CABINET, REFER SERVICING TO QUALIFIED 
PERSONNEL ONLY.

CAUTION:

TO PREVENT ELECTRIC SHOCK DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD

RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT 
BLADE EXPOSURE.

ATTENCION:

POUR PREVENIR LES CHOCS ELECTRIQUES, NE PAS UTILISER CETTE FICHE POLARISEE AVEC 

UN PROLONGATEUR, UNE PRISE DE COURANT OU UNE AUTRE SORTIE DE COURANT, SAUF SI 
LES LAMES PEUVENT ETRE INSEREES A FOND SANS EN LAISSER AUCUNE PARTIE A DECOUVERT.

Safeguards

 

Содержание DSP806









Отзывы: