PICHLER Kunststofftechnik GmbH
january 2012
Whirlpool controller
Control
element
LCD-Display
Reset- button
The displays shown in the display is reversible, so that they both foreign, as well as the
Inside the spa is readable. The change of the display is done using the following
Key: - to read the display from outside the pool
- to read the display from within the pool
-
„
▼
“
Advice Reporting text on LCD-Display
Spa controller detects errors and advises on display.
This may avoid must be closed, that the spa will operating normal.
(Read the pages vor „errors and advices“)
Kids safety lock
Kid lock one of the buttons combination activate or deactivate (disable).
Push the bottom up and down syncronistic (at once) to lock from displays.
To unlock for childres shoring actualition „RESET“ button or once again, syncronistic
pushing up and down buttons.
.:
Jet - pumps
Each actuation of key switch on sequential jet pump (depending on)
1, 2 and 3 on or rather off
Air-blower
You swich on and off the air blower
Pool illumination
(LED therapie lamp with light dimming)
With this key you can switch on or off the pool so you can dim light and luminance stageless.
By pushing the button a second longer then helped the dimming function will be activated.
If you push the button longer will change luminace first until maximum and minimum until
then also be turned on with the service-door illumination then automatically after a time
5 min ago 15min. switch off automaticly.
.
„
▲
“
Note: The conversion only works in the base screen (see
)
page 3
„
▼
“
„
▲
“
„
▼
“
„
▲
“
page 4 of 12
