PICHLER Kunststofftechnik GmbH
january 2012
page 11 of 12
Heat exchanger
Under the menu item "
Customer Menu
", select the arrow button
up to page 2
Then press the menu item "heat exchanger".
In this menu you can choose from when the temperature
should turn on the electric heater.
The adjustable "delay" means that only when these
temperature is still well below the electric heating
is activated.
(Will be avoid with that the heating reservoir and the electrical
heating constantly switch on-off).
If you are in the base menu, press in once on the "OK" button
than you see the current temperature heat
storage value
.
(as example here, on the display will be shown heating exchanger °C: 69.2).
heat exchanger
temperatur range
delay
back
°C
°C
52
5
page 2
menu customer
36.7
set temp.
more settings
factory settings
intervall massage
illumination
back
more settings 2
ozon during bath on
heat exchanger
ê
07.07.2012 TU 13:15
setting
ê
heath exchange
PH-elect.
redox-elect.
chlor-elect.
°C:
ph:
mV:
ppm:
69.2
-.-
----
----
Warning: On the main screen (Page 3) appear alternately
the heat exchanger or the E-heath symbol
It appears the current operational status!
Water inlet
This function is not working, or from one of our dealers
set and activated.
It is here, depending on the current water pressure of the water line
Will follow-up time of Water "Delay" is set.
This prevents unnecessary short activate and deactivate the water-
Level sensor.
auto water inlet
delay
back
selection on
5s
Warning:
The water activity makes waves into the spa, so the water level senor will make
malifunctions. So can set the specially overflow time, to reduce the switch on/off
activity of water waves into the spa. This time to set in seconds should be overfilling
the water into the spa about 1cm more waterlevel from the point of sensor signal.
