Picard PO-3-20S, Руководство пользователя

Страница: 15 / 55

Owner’s Manual
PO-3-20S 15 Revision 0
2.2 Installation requirements
Improper installation, adjustments, alteration, service
or maintenance could result in property damage,
injury or even death.
Prior to the installation, you should make sure that:
 You have a clear way in your building to the desired location that
respects the overall dimensions of your model as shown in
section 2.1.
 The oven is not fully enclosed and there is a venting hood.
 A qualified technician will be in charge of the installation and first
start up.
 The connections required to start the oven are already in place
(see section 2.32.3)
 The cable must be protected by a seal tight conduit, and must be
an ultra-flexible rated for 208-220V/60A/3PH/60Hz.
 Minimal distances must be respected (see table below)
For additional details, refer to our Installation and Start-up guide.
Table 2. Minimal distances between combustible and non-combustible
material
MINIMAL DISTANCES
Oven sides 2 inches of clearance
Oven floor 0 inch of clearance
Oven exit (no conveyor model) 6 inches to let the pita out of the oven