Picard BK-25N, Инструкция по эксплуатации

Страница: 28 / 40

28
TROUBLESHOOTING
Problem Cause Solution
The kettle hi limit controller
won’t turn on after plugging the
main power cord The kettle has no
electricity. -Verify that the kettle is plugged into a power
source.
-Verify the fuses in the electric box on the left side
of the kettle .
The burner isn’t lighting after a
30 second purge cycle. The gas line may be cut. -Verify that the gas valve on your gas line is in the
open position.
-Verify that the gas pressure is between 4 and 6
inches of water column for natural gas and 10 to
12 inches of water column for propane.
The Igniter isn’t
functioning correctly -Verify the fuses, in the electric box located on the
left side of the oven.
-Verify that the electrodes are clean.
-Change the igniter.
-Change the ignition wire.
The burner goes out when it set
to “LOW” position The low fire parameters
adjustments are
inadequate. Communicate with Picard Ovens Customer
Service department to schedule a readjustment of
the burner’s parameters.