PiC indolor ONE CHECK, Инструкция по эксплуатации

Страница: 22 / 116

22 23
14. Do not operate this blood pressure monitor close to a strong electrical field, such as mobile phone,
microwave ovens, X-rays, etc.
15. The device is not suitable for patients under 12 years old.
16. To avoid having to interrupt measurements, we recommend that you always have spare batteries or a
mains adaptor to hand (see page 17).
Specifications
Measurement Method: Oscillometric
Measurement range Pressure: 30~260mmHg; Pulse: 40~199 beats / minute
Pressure Sensor: Semi conductor
Accuracy: Pressure: ±3mmHg Pulse: ±5% of reading
Inflation: Pump Driven
Deflation: Automatic Pressure Release Valve
Memory capacity: last measurement (when unit is switched on)
Auto-shut-off: 4 minute after last button operation
Operating conditions: 10°C~40°C (50°F~104°F); 40%~85% RH max
Storage conditions: -10°C~60°C (14°F~140°F); 10%~95% RH max
DC Power Source: 1.5V DC four R06 (AA) Batteries
AC Power Source: 12V DC 600mA (Ø3.8/Ø1.3)
Dimensions: 125 (L) X 105 (W) X 70 (H) mm
Weight: 420g (G.W.) (w/o Batteries)
Arm circumference: 24~36 cm (9.4”~18.2”)
Limited users: Adult users
0068
: Complies to 93/42/CE
: Type BF Device and cuff are designed to provide special protection against electrical shocks.
IPX0: Ordinary equipment (enclosed equipment without protection against ingress of water) No AP/APG
protection: This device must not be used in the presence of flammable anaesthetic mixtures with air or
oxygen or nitrous oxide.
*Specifications are subject to change without notice.
Patents
Patented device:
295-11-738.9
ZL 95217421.9
Patents in other countries are pending. Blood pressure log.
This product complies with EU Directive 2002/96/EC.
The crossed bin symbol on the appliance indicates that the product, at the end of its life, must be
disposed of separately from domestic waste, either by taking it to a separate waste disposal site for
electric and electronic appliances or by returning it to your dealer when you buy another similar appli-
ance. The user is responsible for taking the appliance to a special waste disposal site at the end of its life. If the
disused appliance is collected correctly as separate waste, it can be recycled, treated and disposed of ecologically;
this avoids a negative impact on both the environment and health, and contributes towards the recycling of the
product’s materials. For further information regarding the waste disposal services available, contact your local
waste disposal agency or the shop where you bought the appliance.
Compliance with EU Directive 2006/66 CE
The crossed bin symbol on the batteries or product pack indicates that, at the end of their life, they
must not be disposed of as urban refuse. They must be disposed of separately from domestic waste,
either by taking them to a separate waste disposal site for batteries or by returning them to your
dealer when you buy similar rechargeable or non-rechargeable batteries.
The chemical symbols Hg, Cd, Pb, printed under the crossed bin symbol, indicate the type of substance contained
in the batteries: Hg=Mercury, Cd=Cadmium, Pb=Led.
The user is responsible for taking the batteries to a special waste disposal site at the end of their life, so that they
can be treated and recycled. If the spent batteries are collected correctly as separate waste, they can be recycled,
treated and disposed of ecologically; this avoids a negative impact on both the environment and human health,
and contributes towards the recycling of the batteries’ substances. Non-compliance with the norms on battery dis-
posal damages the environment and human health. For further information regarding the waste disposal services
available, contact your local waste disposal agency or the shop where you bought the batteries.
Notes
1. The device is manufactured according to applicable standards and complies with all requirements on
protection relating to electromagnetic compatibility; special precautions should however be taken for
EMC and the device should be installed and operated in compliance with the information on EMC in
this leaflet.
2. Portable and mobile radio communication equipment may affect operation of the electromedical de-
vice. When electromagnetic disturbance occurs, repeat arterial blood pressure readings if values are
uncertain.
TABLE 201 – electromagnetic emissions
Guidance and Manufacturer’s Declaration – Electromagnetic Emissions
The ONE CHECK is intended for use in the electromagnetic environment specified below. The customer or user
of the ONE CHECK should ensure the device is used in this environment.
Emissions test Complies Electromagnetic environment - guidance
RF emissions
CISPR 11
Group 1 The ONE CHECK monitor only uses RF energy for its internal function,
therefore its RF emissions are very low and are not likely to cause any
interference in nearby electronic equipment.
RF emissions
CISPR 11
Class B The ONE CHECK monitor is suitable for use in all environments
including domestic ones and those directly connected to the public po-
wer supply network that supplies buildings used for domestic purposes.