PKI-0081
-4-
For lamp installation, one hole with a diameter of 10mm is required. Make necessary preparation such as
installation of lamp bracket.
Lamp installation
■ LPX570
●
The lamp should be mounted at an area suffi
cient to support its size and weight.
●
Insuffi
cient mounting may result in excess vibration leading to shorter life and or physical damage to the lamp or to
vehicle.
●
Do not attempt to install the lamp directly to any plastic part of the car body.
●
If the lamp needs to be installed on the plastic reinforcement materials should be placed on both sides of the plastic part.
●
When installing, make sure the lamp body, lens and rim are not touching the bumper and other plastic parts.
●
The lamps are designed to be mounted upright. But the mounting brackets can be rotated for hanging, pendant mounting.
●
Torque specifi cations on the base mounting 10mm nut is 18.5ft
・
lbs (25N
・
m)
Do NOT use impact wrench.
18.5ft・lbs (25N・m)
