PI P-736.ZRxS PInano, Руководство пользователя

Страница: 16 / 27

User Manual
P736T0002, applies to P-736.ZRxS PInano® Piezo Scanner Systems
CBo, 2021-09-20
Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany Page 16 / 27
Phone +49 721 4846-0, Fax +49 721 4846-1019, Email info@pi.ws , www.pi.ws
Mounting Holders for Petri Dishes, Microscope Slides and
Accessories
Figure 7: M2 threaded holes in the sample holder mounting plane (p. 9) of the motion platform
Requirements

You have read and understood the safety precautions (p. 6).

The P-736.ZRx is not connected to the controller.
Tools and accessories

P-545.PD3, P-545.SH3 or P-545.PP3 holder (p. 10)

Four M2 screws of suitable length (included with the P-545.xx3 holder)

Suitable screwdriver
Mounting a holder
1. Align the holder so that the holding clamps (P-545.PD3 and P-545.SH3) are pointing
upwards or the larger surface of the base body (P-545.PP3) is pointing upwards. Refer
to "Dimensions" (p. 23ff.) for details.
2. Place the holder into the aperture of the P-736.ZRx from above, so that the mounting
holes in the holder and the sample holder mounting plane (see Figure 7 above) of the
P-736.ZRx are in line.
3. Mount the holder with the M2 screws to the provided M2 threaded holes (see Figure 7
above). Pay attention to the specified torque range (p. 23) while doing so.