6 Starting and Operating
N-422 Linear Drive
MP116E
Version: 1.1.1
21
In this Chapter
General Notes on Starting ........................................................................................................... 21
Starting Up the N-422 with E-870 Drive Electronics .................................................................... 22
Operating parameters of the N-422 ............................................................................................ 23
6.1
General Notes on Starting
CAUTION
Risk of crushing by moving parts!
There is a risk of minor injuries from crushing between the moving parts of the linear drive and
a stationary part or obstacle.
Keep your fingers away from areas where they can get caught by moving parts.
NOTICE
Operating voltage too high or incorrectly connected!
Operating voltages that are too high or incorrectly connected can cause damage to the N-422.
Operate the N-422 only with controllers/drivers and original accessories from PI.
Do
not
exceed the operating voltage range (p. 32) for which the N-422 is specified.
Operate the N-422 only when the operating voltage is properly connected; see "Pin
Assignment" (p. 36).
NOTICE
Operating frequency too high!
An excessively high operating frequency can cause damage to the N-422.
Operate the N-422 only with controllers/drivers and original accessories from PI.
Do
not
exceed the operating frequency range (p. 32) specified for the N-422.
6
Starting and Operating
