PI M-06 Series Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 51

PI M-06 Series Скачать руководство пользователя страница 5

1 About this Document

M-06x Rotation Stage

MP47E

Version: 2.1

3

In this Chapter

Objective and Target Audience of this User Manual ..................................................... 3
Symbols and Typographic Conventions ........................................................................ 3
Definition ........................................................................................................................ 4
Figures ........................................................................................................................... 4
Other Applicable Documents ......................................................................................... 6
Downloading Manuals ................................................................................................... 6

1.1 Objective and Target Audience of this User Manual

This user manual contains the information needed for the intended use of the M-06x.
The stages of the M-060, M-061 and M-062 series are summarized under the
designation M-06x in this manual. (x stands for the platform diameter here. Details can
be found in the model overview (p. 9)).

Basic knowledge of servo systems, motion control concepts and applicable safety
measures is assumed.

The latest versions of the user manuals are available for download (p. 6) on our
website.

1.2 Symbols and Typographic Conventions

The following symbols and typographic conventions are used in this user manual:

NOTICE

Dangerous situation

If not avoided, the dangerous situation will result in damage to the equipment.



Actions to take to avoid the situation.

INFORMATION

Information for easier handling, tricks, tips, etc.

1

About this Document

«
...
3
4
5
6
7
...
»

Содержание M-06 Series




















































Отзывы:

Нет отзывов