PI L-417.**9211E1B Series Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 40

background image

7

Startup / Operation

7.1

Starting and Operating the L-417.xx9211E1B

Requirements

✓

You have read and understood the

general safety instructions (p. 7)

.

✓

For startup with a load or in a multi-axis system: You have installed the L-417.xx9211E1B

properly (p. 14)

.

✓

The L-417.xx9211E1B is connected to the

protective earth conductor (p. 15)

.

✓

If the L-417.xx9211E1B was delivered with the transport safeguard fitted: You have

removed the transport safeguard (p. 13)

.

✓

You have read and understood the user manual for the electronics used.

✓

If a digital controller is used: You have read and understood the manual for the PC
software used.

✓

The electronics and if required, the PC software, have been installed (see the user manual
for the electronics).

DANGER

Risk of electric shock if the protective earth conductor is not connected!

If the protective earth conductor is missing or not properly connected, risk of dangerous
touch voltages on the L-417.xx9211E1B in the event of malfunction or failure of the system. If
there are touch voltages, touching the L-417.xx9211E1B leads to serious injuries or death by
electric shock.

►

Connect the L-417.xx9211E1B to a protective earth conductor before startup.

►

Do not remove the protective earth conductor during operation.

►

If the protective earth conductor has to be removed temporarily (e.g., for modifications),
reconnect the L-417.xx9211E1B to the protective earth conductor before restarting.

CAUTION

Risk of crushing by moving parts!

Risk of minor injuries from crushing between the moving parts of the L-417.xx9211E1B or the
load and a fixed part or obstacle.

►

Use safeguards to protect limbs in areas where they could be caught by moving parts.

►

Maintain the safety distances according to DIN EN ISO 13857 when installing protective
structures.

CAUTION

Risk of being caught by moving parts!

Risk of minor injury if hair, jewelry or clothing get caught by moving parts.

►

Fit safeguards around all areas with moving parts.

►

Never work with the unprotected L-417.xx9211E1B if you have long hair, loose jewelry or
clothing.

CAUTION

Burning due to hot surface!

The drive of the L-417.xx9211E1B and the surroundings can heat up during operation.
Touching the drive and surrounding parts can result in minor injuries from burning.

►

Make sure that the hot drive and the surrounding parts cannot be touched.

7 STARTUP / OPERATION

L417M0017EN

‒

5/20/2019

20

M O T I O N | P O S I T I O N I N G

«
...
18
19
20
21
22
...
»

Содержание L-417.**9211E1B Series









































Отзывы:

Нет отзывов

Похожие инструкции для L-417.**9211E1B Series

Бренд: B&K Страницы: 8

Бренд: Landoll Страницы: 6

Бренд: ParaBody Страницы: 9

Бренд: ParaBody Страницы: 3

Бренд: MacDon Страницы: 45

Бренд: H&S Страницы: 30

Ettan IPGphor 3

Бренд: GE Страницы: 64

Бренд: GE Страницы: 56

Бренд: GE Страницы: 132

Бренд: GE Страницы: 16

Бренд: GE Страницы: 474

Бренд: parr Страницы: 20

Бренд: Landoll Страницы: 71

Бренд: York Fitness Страницы: 4

Бренд: W&H Страницы: 23

Бренд: Bartscher Страницы: 24

Бренд: SAMCHULLY Страницы: 48

Бренд: Datavideo Страницы: 28

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды