7
Startup and Operation
7.1
Starting and Operating the L-412.xx9025E1
Requirements
✓
You have read and understood the
general safety instructions (p. 8)
✓
You have
the L-412.xx9025E1 correctly.
✓
You have read and understood the user manual for the electronics used.
✓
If a digital controller is used: You have read and understood the manual for the PC
software used.
✓
The electronics and if required, the PC software, have been installed (see the user manual
for the electronics).
DANGER
Risk of electric shock if the protective earth conductor is not connected!
If the protective earth conductor is missing or not properly connected, risk of dangerous
touch voltages on the L-412.xx9025E1 in the event of malfunction or failure of the system. If
there are touch voltages, touching the L-412.xx9025E1 leads to serious injuries or death by
electric shock.
►
Connect the L-412.xx9025E1 to a protective earth conductor before startup.
►
Do not remove the protective earth conductor during operation.
►
If the protective earth conductor has to be removed temporarily (e.g., for modifications),
reconnect the L-412.xx9025E1 to the protective earth conductor before restarting.
CAUTION
Risk of crushing by moving parts!
Risk of minor injuries from crushing between the moving parts of the L-412.xx9025E1 or the
load and a fixed part or obstacle.
►
Use safeguards to protect limbs in areas where they could be caught by moving parts.
►
Maintain the safety distances according to DIN EN ISO 13857 when installing protective
structures.
CAUTION
Risk of being caught by moving parts!
Risk of minor injury if hair, jewelry or clothing get caught by moving parts.
►
Fit safeguards around all areas with moving parts.
►
Never work with the unprotected L-412.xx9025E1 if you have long hair, loose jewelry or
clothing.
CAUTION
Burning due to hot surface!
The drive of the L-412.xx9025E1 and the surroundings can heat up during operation.
Touching the drive and surrounding parts can result in minor injuries from burning.
►
Make sure that the hot drive and the surrounding parts cannot be touched.
7 STARTUP AND OPERATION
L412UM0002EN
‒
10/24/2022
23
M O T I O N | P O S I T I O N I N G
