PI L-402 Series, Руководство пользователя, Страница: 24 / 43

6 Start-Up
20 Version: 1.2.0 MP164E L-402 Mniature Stage
NOTICE
Damage or considerable wear due to high accelerations!
High accelerations can cause damage to or considerable wear on the mechanical system.

Stop the motion immediately if a controller malfunction occurs.

Ensure that the end of the travel range is approached at low velocity.

Determine the maximum velocity for your application.
NOTICE
Unintentional motions!
Unintentional motion of the L-402 is possible when it is connected to the controller. Defective
software or incorrect operation of the software can also result in unintentional motion.

Do not place any objects in areas where they can be caught by moving parts.

Before connecting the L-402, check whether a macro is defined as the start-up macro in
the controller, and cancel the selection of the start-up macro if necessary.
6.2 Starting up the L-402
Requirements
You have read and understood the general notes on start-up (p. 19).

For starting up with a load or in a multi-axis system: You have properly installed the L-
402 (p. 12).

The L-402 has been properly connected to the controller (p. 18).

You have read and understood the user manual of the controller used.

The required PC software has been installed.

You have read and understood the manual of the PC software used.
Starting up the L-402
1. Start up the controller (see user manual of the controller).
Configure the controller(s) during start-up using the PC software for the L-402 used (see
user manual of the controller, and the PC software): Select the entry in the stage
database that exactly matches the L-402 model used. (p. 5).
2. Start a few motion cycles for testing purposes (see user manual of the controller).