PI H-811, Руководство пользователя

Страница: 43 / 99

6 Startup
H-811 Hexapod Microrobot MS235E Version: 2.4.0 39
Accessories

PC with suitable software (refer to the user manual of the controller)
Starting up the hexapod system
1. Start up the controller (refer to the user manual of the controller).
2. Run a few motion cycles for test purposes (refer to the user manual of the controller).
6.3 Optional: Operating the Hexapod with a Separate 12 V Power
Adapter
The hexapod can be supplied via a separate 12 V power adapter in static applications that
require increased position stability.
INFORMATION
If your controller has an
E-Stop
socket (C-887.522, .523, .532 and .533 models):
Deactivating the 24 V output on the controller via the
E-Stop
socket remains ineffective when
the hexapod is supplied via a separate power adapter.

If you want to actively use the E-Stop socket, connect the hexapod's power adapter
accordingly. For further information, see "Using the E-Stop Socket" in the user manual for
the C-887.5xx controller (MS244).
Requirements

You have read and understood the general notes on startup (p. 37).

You have read and understood the user manual for the controller.

You have fixed the hexapod to an underlying surface according to the instructions in
"Installation" (p. 23) and also fixed the load onto the hexapod.

The 12 V power adapter is not connected to the power socket via the power cord.

The controller is switched off, i.e., the on/off switch is in the position.
Accessories

C-501.12060M12 12 V wide input range power supply (60 W / 5 A), included with the H-
811.12PS option, which is available as optional accessory (p. 12).

PC where PITerminal is installed (see user manual for the controller)