04.6 DT-80 Rotation Stage
Immediately switch off the servo-control system of the affected rotational
axis.
• Check the settings of the servo-control parameters.
Moving parts attached to devices with motorized rotation stages can
accelerate rapidly and generate high forces which can cause injury or
damage to equipment.
Unintentional motion of the rotation stage is possible when it is connected to
the controller for the first time. Defective software or incorrect operation of
the software can also result in unintentional motions.
• Do not place any objects in areas where they can be caught by moving
parts.
Set the control signal so that the moving part does not stop abruptly or try to
continue motion.
• Determine the maximum velocity for your application.
2.2.4 Measures during Operation
• If noise during occurs during operation of the DT-80, check the settings
of the servo-control parameters of your controller.
• During continuous operation at room temperature, do not exceed 90 %
of the control signal level.
• For continuous operation at other temperatures, observe the maximum
permissible duty cycle in relation to the ambient temperature or contact
our customer service department for more information (see chapter 9).
2.2.5 Measures during Maintenance
The DT-80 is precision adjusted.
• Do not loosen any sealed screws.
Dirt, oil, lubricants and condensation will render the motor/drive inoperable.
Keep the DT-80 free of dirt and condensation.
3.
UNPACKING
1. Unpack the DT-80 with care.
2. Compare the contents with the items listed in the contract and the
packing list.
3. Inspect the contents for signs of damage. If there is any sign of damage
or missing parts, contact PI miCos immediately.
4. Keep all packaging materials in case the product needs to be returned.
WARNING
Risk of suffocation for children. Keep the packaging foil
away from children.
Dispose
of
packaging
materials
according
to
environmental regulations.
NOTICE
All specifications in this user manual refer only to the
standard products that are included in the PI-miCos
catalog. Any special features that are different, in particular
special requests from customers, are supplied with the
user manual as additional documentation in the form of
"Technical Notes".