11
www.phywe.com, © All rights reserved
09057-99 / 2115
With an additional goniometer: (not included in the
XR 4.0 X-ray expert unit)
o
Angular increment: 0.1–10°
o
Rate:
0.5–100.0
s/increment
o
Sample rotation range: 0–360°
o
Counter tube rotation range:
−
10
…
+170°
o
PC control via Sub-D socket
Housing (mm³ without feet and handles): 682
x
562
x
446
(W
x
H
x
D)
Experiment chamber (mm³): 440
x
345
x
354 (W
x
H
x
D)
Connection:
110/240
V~, 50/60
Hz
Power consumption: 200
VA
Mass:
63.2
kg; with tube: 68.2
kg
PC control via USB 2.0
9 SCOPE OF SUPPLY
09057-99 XR 4.0 expert unit, X-ray unit, 35
kV
Mains power cable
USB
cable
“measure X-ray” software (14414-61)
10 ACCESSORIES
An extensive range of packages and accessories for the
X-ray unit is available:
09057-51 XR 4.0 X-ray Plug-in Cu tube
(predecessor 09057-50 compatible)
09057-61 XR 4.0 X-ray Plug-in Mo tube
(predecessor 09057-60 compatible)
09057-71 XR 4.0 X-ray Plug-in Fe tube
(predecessor 09057-70 compatible)
09057-81 XR 4.0 X-ray Plug-in tungsten tube
(predecessor 09057-80 compatible)
09057-10 XR 4.0 X-ray goniometer
09057-26 XR 4.0 X-ray fluorescent screen
14414-61 XR 4.0 Software measure X-ray
09057-18 XR 4.0 X-ray optical bench
09057-49 XR 4.0 X-ray protection cover
01200-02 Handbook Physics X-Ray Experiments
09056-05 XR 4.0 X-ray Lithium fluoride crystal, mounted
09056-01 XR 4.0 potassium bromide (KBr) crystal, mounted
09056-02 XR 4.0 X-ray Absorption set for X-rays
09057-01 XR 4.0 X-ray Diaphragm tube
d
= 1
mm
09057-02 XR 4.0 X-ray Diaphragm tube
d
= 2
mm
09057-03 XR 4.0 X-ray Diaphragm tube
d
= 5
mm
09056-03 XR 4.0 X-ray Diaphragm tube w. nickel foil
09058-03 XR 4.0 X-ray Diaphragm tube w. zirconium foil
09057-04 XR 4.0 X-ray Compton attachment f.x-ray-unit
09058-01 XR 4.0 X-ray NaCl-monocrystals, set of 3
09056-04 XR 4.0 X-ray Chemical set for edge absorption
09058-11 XR 4.0 X-ray Crystal holder for Laue-pattern
09058-09 XR 4.0 X-ray holder for powder probes (diffrac-
tometry)
09057-08 XR 4.0 X-ray film holder
09058-02 XR 4.0 X-ray Univ. crystal holder f. x-ray-unit
09058-30 XR 4.0 X-ray energy detector (XRED)
13727-99 Multi channel analyser - extended version
09058-31 XR 4.0 X-ray Specimen set metals for X-ray
fluorescence
09058-32 XR 4.0 XRED cable 50
cm
07157-93 Large-scale display, digital
09057-19 XR 4.0 Display-Connect, set of transmitter and
receiver
Fig. 13: XR 4.0 Display Connect module
For display of measured values and device parameters, the
large-scale display can be connected via the Display Connect
set. For this purpose, the TX adapter of the Display Connect
module must be connected to the external socket panel
("Display” socket). The RX adapter must be connected to the
large-scale display. The values are selected via the menu on
the control panel.
Sets
XRE 4.0 X-ray expert set 09110-88
XRW 4.0 X-ray wireless demonstration upgrade set,
09115-88
XRP 4.0 X-ray solid state upgrade set, 09120-88
XRC 4.0 X-ray characteristics upgrade set, 09130-88
XRS 4.0 X-ray structural analysis upgrade set, 09140-88
XRI 4.0 X-ray imaging upgrade set, 09150-88
XRM 4.0 X-ray material analysis upgrade set, 09160-88
XRD
4.0
X-ray
dosimetry
and radiation damage upgrade
set, 09170-88
XRCT 4.0 X-ray Computer Tomography upgrade set,
09180-88
11 WARRANTY
We give a warranty of 24 months for units supplied by us in-
side the EU, and a warranty of 12 months outside the EU.
Any damage that is due to non-compliance with the operating
instructions, improper use, or natural wear is excluded from
the warranty.
The manufacturer can only be held liable for the function and
safety-relevant properties of the unit, if the maintenance, ser-
vice, and modifications of the unit are performed solely by the
manufacturer or by an institution that is expressly authorised
by the manufacturer.
