PHOENIX base strip WAGO male header 6-pole
5.1.1 PHOENIX 2-pole Base Strip
The permissible input voltage is +5 V DC if your SBC is equipped with a 2-pole
PHOENIX connector.
The following table show the pin assignment.
Pin
Signal
Description
1
VCC5V_IN
+5V power supply
2
GND
Ground
Pin Assignment of the 2-pole PHOENIX Connector atX67
5.1.2 USB Micro AB
If your board provides an USB Micro-AB female connector at the upper side of the board a
standard USB Micro power supply
with +5 V DC can be used to supply the phyBOARD-Wega.
Caution!
Do not confuse the USB Micro connector on the upper side of the board with the one on the back side
of the board which provides USB OTG connectivity. The USB Micro connector on the upper side is
exclusively used for power supply and has no other USB functionality!
© PHYTEC Embedded Pvt. Ltd. 2014 15
