This lists all available connectors on the phyBOARD-Wega
.
Reference
Designator
Description
X11
Secure Digital / Multi Media Card (Micro-slot)
X15
USB Host connector (USB 2.0 Standard-A)
X16
Ethernet 0 connector (RJ45 with speed and link LED)
X17
Ethernet 1 connector (RJ45 with speed and link LED)
X42
USB On-The-Go connector (USB Micro-AB)
X55
Mono Speaker output (2-pole Molex)
X65
CAN connector (5×2 pin header)
X66
RS-232 with RTS and CTS (UART1 5×2 pin header)
X67
Power supply 5 V only (via 6-pole WAGO male header, or
2-pole PHOENIX base strip)
X69
Expansion connector (2×30 socket connector)
X70
A/V connector #1 (2×20 socket connector)
X71
A/V connector #2 (2×8 socket connector)
X72
Optional 5 V power supply via USB Micro-AB connector
X73
Stereo Line Out and Line In connector
(2×3 pin header)
N
o t e :
Ensure that all module connections are not to exceed their expressed maximum voltage or current.
Maximum signal input values are indicated in the corresponding controller User's Manual/Data Sheets.
As damage from improper connections varies according to use and application, it is the user‘s
responsibility to take appropriate safety measures to ensure that the module connections are protected
from overloading through connected peripherals.
© PHYTEC Embedded Pvt. Ltd. 2014 13
