Phytec nanoModul-164, Быстрый старт

Страница: 45 / 96

Getting Started

PHYTEC Meßtechnik GmbH 2003 L-379e_4
41
•
Resetting the Development Board (at S1) will execute the hello.h86
file loaded into the Flash.
•
Successful execution will send the character string "Hello World"
from the target hardware to the HyperTerminal window.
•
Click the disconnect icon
If no output appears in the HyperTerminal window check the power
supply, the COM parameters and the RS-232 connection.
The demo application within the file hello.h86 initializes the serial
port of your nanoMODUL-164 to 9600 baud. The initialization values
are based on the assumption that the microcontroller runs at a 20 MHz
internal clock frequency. Please note that the nanoMODUL-164 is
populated with an oscillator with a frequency of just 5 MHz. An
internal PLL (Phase Locked Loop) device renders an internal 20 MHz
clock frequency. If your nanoMODUL-164 is equipped with an
oscillator with a different frequency value, the demo application
might transmit using another baud rate. This may lead to incoherent
characters appearing in the HyperTerminal window following
execution of code. Additional information can be found in the
readme.txt file in the Hello project directory.