Tips:
1. If the Camera Live software cannot search for the camera, please check the
camera’s hardware connections in the chapter of
.
Hardware Installation
2. Phylink Camera Live can only search for a camera within your local network.
That means your computer and your camera need to be connected to the same
network router at your home or office.
3. Please note that browser itself does not support video decoding and playback, it
needs to install a plug-in player.
To play the live video of camera, the web browser needs to install the flash player
plug-ins for Chrome and Safari or ActiveX Control for Internet Explorer.
If you are trying to view the camera for the first time using Internet Explorer, your
browser may prompt you to install or allow an "ActiveX Control".
If you are trying to view the camera for the first time using Chrome or Firefox, your
browser will prompt you to install or allow the “Adobe Flash Plug-in”.
4. To access the camera via the browser remotely, you have to know your camera's
URL address. You can log in to the camera on the local network and go to
>
Setting
System
.
On the system information page you can find the Internet URL of the camera. You
can type this URL into your browser and access the camera remotely.
5. To learn more about accessing the camera from a browser, please refer to "
How
to access camera from web browser
Support - Technical Articles
" in
section from
our technical support website.
30
