Phylink Bullet HD, Руководство пользователя

Страница: 21 / 96

Section 2 - Installation
Video Quality
iPad 17:52 62
%
Back
Primary Stream
Secondary Stream
Environment Mode 50Hz
Horizontal Flip
Vertical Flip
On-Screen-Display
Disable
Stream Setup
iPad 17:52 62
%
Back
Image Size
Frame Per Second
Bitrate (Kbps)
Confirm
Poor Medium Best Good
640x480
15
512
Pre-Recording (sec)
0
The settings for these can be adjusted. Press on for the settings of stream profiles.
There are two pre-programmed stream profiles: primary stream and secondary stream.
These streams profiles help for quick setup.
Two options: 50Hz & 60Hz. Set according to the mains [ ] Environment Mode
frequency in the country of use.
For UK this would be 50Hz. For US this would be 50Hz.
There are four quality level of video can be set quickly.
You can also make further changes to the details of quality.
Please note that the higher the video quality, the more network bandwidth
you will need to support it.
The Pre-Recording Time control how long the video is recorded [Pre-Recording]
before motion detection is detected by a camera.
You can fill a value of seconds to adjust this times.(The Max value is 10 seconds)
Video pre-recording allows the camera to record up to 10 seconds of video leading
up to a related trigger event. It will allows users to review the moments before the
camera was triggered.
Moving objects triggered motion detection recording function, but the delay
problems caused the loss of data images in the beginning of the event, in some
situations, these are very important. Video pre-recording will help you catch
everything.
PHYLINK Bullet HD User Manual 21
2.6.3 Advanced settings on iOS device
Video Quality