manualshive.com logo in svg

Phylink Bullet HD, Руководство пользователя

Поделиться
Скачать
Phylink Bullet HD Скачать руководство пользователя страница 11

Section 2 - Installation

To access the Micro SD card slot on the outdoor camera series, please bring the camera
indoors (in an area of low humidity), then unscrew the entire front part of the camera.
It is easiest to do it if you take the

off first.

Sun Shield

PHYLINK Bullet HD User Manual

2.2   Insert Micro SD Card into Camera

IMPORTANT!

- The PHYLINK Bullet  is for waterproof design, but when you take

off the Front Shell to insert a Micro SD-card, you must screw the Front Shell back
tightly to avoid water leakage and humidity.

Please be very careful not to touch the lens. The Micro SD slides into the slot and there
is a positive “click” when it is locked in place. If it doesn’t want to go in effortless it is
probably upside down.

When done, please be careful when screwing the

back on to make sure the

Front Shell

threads are engaging nicely. Do not use any tools, hand tight is good enough.

Step 1

Step 2

Step 3

11

Содержание Bullet HD

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды