Phylink Bullet HD, Руководство пользователя

Страница: 10 / 96

Connection Using AC adapter
Connect the camera to your switch or router using the provided network cable.
Connect the AC adapter cable from the camera to a power outlet.
Note: DHCP sever and UDP port must be enabled on your router(which is default
setting on most router), for automatic of IP address to the network camera.
If needed, please refer to your router's user manual on how to enable
DHCP server and UDP.
Section 2 - Installation
The PHYLINK Bullet offers exceptional video quality and audio on your PC, MAC, and
smart phone, whether at home or in the office.
Real waterproof with IP66 Certificate. Rotatable stand for easier outdoor installation
around your house, indoor or outdoor.
Fully compatible connectivity, works over Wi-Fi, Ethernet, or Power over Ethernet
(PoE) 802.3af.
Connection Using a PoE Switch
If using a PoE switch or router, connect the network camera via Ethernet cable.
PoE will transmit both power and data over a single cable. You don’t need to
Connect the AC adapter in this case.
PHYLINK Bullet HD User Manual
2.1 Hardware Installation
Mount the antenna
If using a Wi-Fi Network, the provided external antenna must be mounted to the SMA
connector on the camera body.
Mount the Camera
1. Attach the alignment sticker to the wall. Drill three holes into the wall. Then hammer
the supplied plastic anchors into the holes and secure the plate with supplied screws.
3. Once you mount the camera upon the ceiling or the wall, you need to tighten the
joint of stand. The design of wrench on the stand makes you easily screw the joint
without any extra tool.
2. Adjust the angle of the camera to aim at the shooting area.
10