15.Troubleshooting :
26
Note:
Your meter can show results either in “mg/dL”
or “mmol/L”units. It is very important to use the correct
unit of measurement to properly manage your diabetes.
If you live in the USA you should use mg/dL; your result
will
never
have a decimal point. If you live in Canada and
some European countries you should use mmol/L; your
result will
always
have a decimal point. The mg/dL display
is on by default.
Error messages:
E
_
1
:
The temperature is too low.
E_2
:
The temperature is too high.
E_3
:
Battery Low.
E_5
:
The strip is wet or used.
E_6
:
Error in meter or strip.
E_7
:
Memory damaged.
HI
:
The glucose level is too high.
LO
:
The glucose level is too low.
Following is a summary of all Error Messages. These
messages help to identify certain problems
,
but do not
appear in all cases when a problem has occurred
.
Improper use may cause an inaccurate result without
producing an error message or a symbol
.
In the event
of a problem
,
refer to the information in the table
under Solution.
