7. Installing the battery
1
2
3
4
1.Turn off the meter by pressing
“
M
”
button and hold for 2 seconds
before replacing the batteries
.
Open the battery cover on the
back of the meter by hand or by
pushing the tab in the direction
of the arrow and pulling the
cover up.
2
.
Remove the two used
batteries
.
3.Insert 2 new batteries with
correct
＋
/
－
direction
.
(
Battery
:
AAA 1.5V 2 Alkaline 24A LR03
)
4.Put the battery cover back in
place and snap it closed.
11
Note:
1.It is suggested that batteries need to be
replaced when the battery icon appears
empty. If keep using the meter, the battery
icon will start flashing and an error message
E_3 will appear on the screen.
2.Note that replacing the battery will not
reset the stored testing results
.
3.You need to reset the time and date after
the batteries are replaced.
4.If there is any unexpected symbol on the
display, please follow the above procedure
to replace the batteries again.
5.Please dispose of batteries according
to your local ordinances.
