1. To display the average (AVG) test result, please turn meter
off. Press C and M keys at the same time and hold for about 2
seconds, wait for AVG displayed on screen, then release the
two buttons. The meter will be in the average mode with
“AVG” font displayed.
2.When the “AVG” is flashing at the lower left corner of screen,
the number 7 will be displayed under AVG and the average of
the last 7 days test results will be displayed in the center of the
screen. The number of tests done in the last 7 days will be
also displayed at the lower right corner of screen. If you want
to see the average of 14, 28, 60 and 90 days, keep pressing
the M key to move the LCD display forward from 7 day
average to 90 day average. The average display will move
from 90 days backward to 7 days if you continue to press C
key. You will hear:
“The average for 7 day is
number/unit
.”
3.Press the M key and hold for only 2 seconds to exit the recall
mode and turn off the meter, or the meter will automatically
power off after 20 seconds. You will hear:
“Goodbye.”
4.When “---” is displayed, showing that there are no test results
in memory. You will hear:
“Zero memory.”
Calculations:
The 7 days average is the average of the last 7 day test results.
The 14 days average is the average of last 14 day test results.
The 28 days average is the average of last 28 day test results.
The 60 days average is the average of last 60 day test results.
The 90 days average is the average of last 90 day test results.
Note:
1.HI/LO results are not stored in the memory.
2.Do not insert the strip into the meter when you want to recall
the test results.
C. Viewing the Average (AVG) of Test Data in Memory
23
