background image

4

Heater Warnings

Special Notes

Warning

Caution

Caution - Operational Considerations

Indicates that personal injury or damage to equipment may occur unless specific guidelines 

are followed.

 Indicates that serious or fatal injury may result if specific guidelines are not followed.

• 

The installation of this kit requires trained decision making 
concerning locating and integrating components, tying 
components together, rerouting, or relocating OEM 
components, etc. It is impossible to describe all of the 
safety and operational considerations in the installation 
instructions, therefore, the technician must exercise 
professional judgment to achieve a safe and quality 
installation.

• 

Read and understand this manual before attempting to 
install the heater. 

• 

Failure to follow all these instructions could cause serious 
or fatal injury.

• 

Exhaust pipe will become very hot during heater 
operation. 

• 

Avoid touching exhaust pipe during operation.

• 

Route exhaust pipe in a manner to shield it from anyone 
making contact with it.

This heater is not designed  for use with straight  bio-diesel 
(Blends of bio-diesel up to 10% are acceptable)
Operating outside of these conditions may plug the heater 
with soot and result in combustion failure.

This heater is not designed to operate continuously at 
altitudes above 1500 meters (4920’).
Operating in these conditions may plug the heater with soot 
and result in combustion failure.

• 

Heater must be turned off while re-fueling.

• 

Do not install heater in enclosed areas where combustible 
fumes may be present.

• 

Exhaust pipe must maintain a minimum a distance of 
50mm (2”) from any flammable or heat sensitive material.

• 

Ensure there are no leaks in the fuel system.

• 

Ensure that exhaust fumes cannot enter passenger 
compartments.

Warning - Installation Hazards

Warning - Burn Hazards

Bio-Diesel

High Altitudes

Warning - Explosion Hazards

Warning - Fire Hazards

Warning - Asphyxiation Hazards

Note

:   

 Highlight areas requiring special attention or clarification.

Содержание PHP-20A




































Отзывы: