17
Fuel Pick-Up Pipe Installation (Drill Option)
• Drill mounting holes in tank to accommodate pick-up pipe as shown in Figure F4
• Drill the two (1/4”) holes first. (Figure F5)
• Drill a 7/8” hole. (Figure F6)
• Mount the fuel pick-up assembly pipe as shown.
• Position pick-up pipe 4” from bottom of tank (1” for flat tanks)
Fuel Line Connections
• Route fuel lines from the fuel pick-up pipe to the heater.
• Use only fuel lines provided (Other sizes or types of fuel lines may inhibit proper fuel flow)
• Make proper butt joints using clamps and connector pieces as shown.
• Use a sharp utility knife to cut plastic fuel lines to avoid fuel line pinching.
Fuel System
*Figure F5
*Figure F6
2 x 6mm (1/4”)
Ø22 mm (7/8”)
24mm (0.93”)
