PHP PH21A, Руководство пользователя

Страница: 15 / 36

15
Fuel System
Fuel Pick-Up Pipe Installation (Drill Option)
• Drill mounting holes in tank to accommodate pick-up pipe as shown in Figure F4
• Drill the two (1/4”) holes first as shown in Figure F5.
• Drill a 7/8” hole as shown in Figure F6.
• Mount the fuel pick-up assembly pipe as shown in Figure F4.
• Position fuel pick-up 4” from bottom of tank for round tanks and 1” for flat tanks (cut tube as
necessary)
Fuel Line Connections
• Route fuel lines from the fuel pick-up pipe to the heater.
• Use only fuel lines provided (Other sizes or types of fuel lines may inhibit proper fuel flow)
• Make proper butt joints using clamps and connector pieces as shown.
• Use a sharp utility knife to cut plastic fuel lines to avoid fuel line pinching.
Figure F6 Figure F5