PHP PH21A, Руководство пользователя

Страница: 10 / 36

10
Heater Mounting
• A mounting plate and hardware are provided with the truck heater kit.
• Refer to Figures M2 & M3 for assembly orientation. Note: If the mounting plate will not
be used, the heater flange can be used as a template to mark where the individual
components openings should be made.
• For ease of installation fasten the mounting plate to the heater and make exhaust,
combustion air intake and fuel connections at the base of the heater before mounting
the assembly to the vehicle.
• Cut a two 3” holes or a 4”x 5” rectangular opening on the cabin floor to accommodate
mounting plate and seal. Refer to Figure M4.
• Secure mounting plate to vehicle with self taping “Tek” screws provided.
Mounting
Figure M2