background image

Phottix Laso TTL Flash Trigger_Transmitter 

Thank you for purchasing a Phottix Product 

Note: Before using the Phottix Laso

 

TTL Flash Trigger, please read this instruction 

manual carefully, while also referring to the instruction manuals of your camera, flash 
and other relevant devices. 

 

 

 

 

Warnings 

1.

 

This product is a precise electronic instrument. Do not expose to damp 
environments or dust. 

2.

 

Please shut down the power of all devices when installing the wireless trigger. 

3.

 

Do not drop or crush. 

4.

 

Do not use the wireless trigger at flammable, explosive or high temperature 
environment. 

5.

 

Do not use harsh chemicals or solvents to clean the body. Use a soft cloth or lens 
paper. 

6.

 

Remove batteries from the wireless trigger if not being used for an extended 
period. 

7.

 

Interference: The Phottix Laso wireless trigger transmits radio signals at 2.4GHz. 
Its performance can be affected by electrical current, magnetic fields, radio signals, 
wireless routers, cellular phones, and other electronic devices. Environmental 
objects, such as large buildings or walls, trees, fences, or cars can also affect 
transmission performance. If your wireless trigger can’t be triggered, move its 
location slightly. 

 

 

FCC Interference Statement: 

This device complies with part 15 of the FCC Rules. Operation is subject to the 
followingtwo conditions: (1) This device may not cause harmful interference, and (2) 
this device must accept any interference received, including interference that may 
cause undesired operation. 
 

FCC Radiation Exposure Statement: 

This equipment complies with FCC RF radiation exposure limits set forth for an 
uncontrolled environment. This device and its antenna must not be co-located or 
operating in conjunction with any other antenna or transmitter. 
 

NOTE

: This equipment has been tested and found to comply with the limits for a 

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are 
designed to provide reasonable protection against harmful interference in a 
residential installation. This equipment generates, uses and can radiate radio 

Содержание PH89092

































Отзывы: