En
INSTRUCTION MANUAL
23
1. Press Function Button 4 until the LCD displays
. Press Function
Button 1 (underneath
) to access the zoom adjustment screen.
2. Press Function Button 3 (underneath
) to cycle through M(Master), A,
B, C groups
3. Use the Selection Dial to change the zoom of the selected group, the master
flash can be set to Azoom (automatic zoom that changes dynamically as a
zoom lens is changed) or Mzoom 20mm, 24 mm, 28 mm, 35 mm, 50 mm,7 0
mm, 80 mm, 105mm, 135mm and 200mm(Mzoom only in group A,B,C)
4. Press Selection Button 4(underneath
) to confirm and exit the
zoom adjustment screen.
Setting channels
1. In Standard or Ratio Mode interface, press Function Button 4 to
access
, and use Function Button 1 (underneath
) to enter
the Channels Selection area
2. Use the Selection Dial to cycle through CH 1-32 (Channels 1-32)
3. Press the OK Button to confirm and exit the channel Selection
Setting Digital ID
1. Press Function Button 4 to access
, press Selection Button
2(underneath
) to enter the Digital ID Selection screen.
2. Press the OK Button to choose the digit in the ID, use the select Dial to change
the digit.
3. Press
Button to confirm and exit the ID Selection screen.
Odin II Rx(receiver) Mode
When the Odin II Rx Wireless Mode is selected the Phottix Juno TTL Flash can
be controlled and triggered from another Juno TTL Flash in Odin Tx Mode or an
Odin II Transmitter.
