Phottix Indra360 TTL, Инструкция по эксплуатации

Страница: 12 / 37

12
En
INSTRUCTION MANUAL
2. Press Function button 1 or Function button 2 to cycle through the menu
items – C.Fn 00 to 03.
3. Turn the “Adjust/Set knob” to change the functions within the menu.
4. Press Function button 4 to exit the C.Fn menu.
Custom Functions Chart
Custom Functions
The Phottix Indra360 TTL Studio Light comes with a number of programmable
custom functions. To edit these functions (see below):
1. Press and hold Function button 4 and the “Adjust/Set knob” for 3 seconds to
enter the C.Fn Menu Screen.
Replacing the flash tube
1. Disconnect the Indra360 TTL Studio light from a power source for 10
minutes before changing the flash tube.
2. Remove the Reflector as shown above.
3. Gently separate the Glass Dome from the snap mount, remove the Glass
Dome. (Picture 10)
4. Gently hold the flash tube to remove it from the snap slot. (Picture 11)
5. Insert a new flash tube into the snap slot. (Picture 12)
6. Mount the Glass Dome align the snap mount. (Picture 13)
7. Attach the Reflector as shown above.
Note: Please wear gloves instead of touching the flash tube directly when
replacing the flash tube.