Phottix Indra360 TTL, Инструкция по эксплуатации

Страница: 9 / 37

9
En
INSTRUCTION MANUAL
Wireless Receiving Mode
The Phottix Indra360 TTL Studio Light is equipped with 5 wireless receiving
modes: Odin-C, Odin-N, Strato II, Opt-Slave and RX OFF. Please see below for
more details.
Supported Flash Modes
Odin-C Radio Frequency Receiving Mode
This mode allows the Indra360 TTL Studio Light to be triggered by a Phottix
Odin TTL Flash Trigger TCUs for Canon or by a Phottix TTL Transceiver
Flash for Canon in Odin TX mode. To work correctly they must be set to the
same channel and in the same group.
How to use:
1. Press Function Button 4 or turn the “Adjust/Set Knob” until
appears on the LCD display.
2. Press the corresponding function button to . The wireless
receving function option will be highlighted on the LCD display.
3. Turn the “Adjust/Set Knob” to change the wireless mode to Odin-C.
4. Press the “Adjust/Set Knob” to confirm the setting.
5. Press the corresponding function button to in to
adjust from TTL, Manual or Multi.
Odin-N Radio Frequency Receiving Mode
This mode allows the Indra360 TTL Studio Light to be triggered by a Phottix
Odin TTL Flash Trigger TCUs for Nikon or by a Phottix TTL Transceiver
Flash for Nikon in ODIN TX mode. To work correctly they must be set to the
same channel and in the same group.
How to use:
1. Press Function Button 4 or turn the “Adjust/Set Knob” until
appears on the LCD display.
2. Press the corresponding function button to . The wireless
receving function option will be highlighted on the LCD display.
3. Turn the “Adjust/Set Knob” to change the wireless mode to Odin-N.
4. Press the “Adjust/Set Knob” to confirm the setting.
5. Press the corresponding function button to in to adjust
from TTL, Manual or Multi.
Strato II Radio Frequency Receiving Mode
This mode allows the Indra360 TTL Studio Light to be triggered by the
Phottix Odin TTL Flash Trigger TCUs for Canon/Nikon, the Phottix TTL
Transceiver Flash for Canon/Nikon in Odin Tx mode, the Phottix Strato TTL
transmitter for Canon/Nikon or by the Phottix Strato II Multi transmitter for
Canon/Nikon. To work correctly they must be set to the same channel and in
the same group.
Please note:
HSS, SCS, and TTL are not supported in Strato II Radio Frequency Receiving
Mode.
How to use:
1. Press Function Button 4 or turn the “Adjust/Set Knob” until
appears on the LCD display.
2. Press the corresponding function button to . The wireless
receving function option will be highlighted on the LCD display.
3. Turn the “Adjust/Set Knob” to change the wireless mode to Strato II.
4. Press the “Adjust/Set Knob” to confirm the setting.
5. Press the corresponding function button to in to
adjust from Manual and Multi.
Opt-Slave Optical Pulse Receiving Mode
In this mode any other studio lights or flashes fired nearby will trigger the
Indra360 TTL Studio Light.
Please note:
Pre-flashes from nearby TTL flashes will trigger the Phottix Indra if set in
Opt-Slave mode. Please take care when using this mode that nearby TTL
flashes do not trigger the Phottix Indra before you are ready.
How to use:
1. Press Function Button 4 or turn the “Adjust/Set Knob” until
appears on the LCD display.
2. Press the corresponding function button to . The wireless
receving function option will be highlighted on the LCD display.
3. Turn the “Adjust/Set Knob” to change the wireless mode to Opt-Slave.
4. Press the “Adjust/Set Knob” to confirm the setting.
RX OFF Mode
In this mode wireless receiving is turned off.
How to use:
1. Press Function Button 4 or turn the “Adjust/Set Knob” until
appears on the LCD display.
2. Press the corresponding function button to . The wireless
receving function option will be highlighted on the LCD display.
3. Turn the “Adjust/Set Knob” to change the wireless mode to RX OFF.