Photron FASTCAM-X 1280PCI, Руководство по оборудованию

Страница: 29 / 43

FASTCAM-X1280PCI Series Hardware Manual
- 29 -
2.4.5. Tips for multi-camera sync operation
Triggering from software
With the internal sync cables connected (see subsection 2.4.2), software triggering can be done to
all the boards without any delay between them.
Using external trigger
You can use external triggers for multi-camera sync operation. Input a trigger to the master board
from an external source. The trigger is then transferred to slave boards for sync operation.
Note: Input of an external trigger to a slave is invalid: it will not be recognized as a trigger.
Note: Triggering takes place in all the boards, the master and slave(s), set up for sync operation all
at one time in synchronization. In the multi-camera sync operation system, no individual board can
be triggered independently from others.