Photron FASTCAM-X 1280PCI, Руководство по оборудованию

Страница: 28 / 43

FASTCAM-X1280PCI Series Hardware Manual
- 28 -
2.4.4. Software setting
Hardware setting for multi-camera sync operation has completed in the previous subsections. In
this subsection, how to initialize the internal connections by the control software is discussed. For
the basic operation of the software, please see the Software Operation Manual.
1)
Select a slave camera in the camera selection pull-down box.
2)
Press the More button to start setting details.
3)
Check
“
Ext Sync In
”
to enable the external sync mode. Now the slave camera will operate
synchronized to sync and trigger signals from the master.
Note:
“
Ext Sync In
”
for master camera is gray out and is not selectable.
4)
Repeat the above steps 1) through 3) with all the slave cameras.
This concludes the software setting procedure.